*This is kind of a two-fer! If you order one, you get both the mimic and the prop version. Ya can't beat that with a demonically possessed stick!
**There are two different versions of the coffin. One has a gothic looking cross on top, and the other is plain topped. Our default is the plain one. If you'd prefer the cross, let us know in the personalization box and we'll be glad to oblige.

Mimic Coffin is 50mm long, 16mm wide, and 17mm high.
Mimic Door is 44mm high, 36mm wide, and 25mm deep from the tip of the rear tentacle to the tip of the tongue. (I never thought I would type that sentence, but here I am...)
Mimic Chest is 19mm wide, 26mm deep, and 21mm high.
Mimic Book is 16mm wide, 19mm deep including the slimey bits, and 15mm high.
Mimic Barrel is 22mm wide, 35mm deep, and 27mm high.

Welcome to the Workshop! Need a surprise for your party? Something that can put up a fight and make them work (and maybe squirm a bit) for that loot? Just need some villainous creatures in your life? We can help with that, and we won’t judge you for how harsh you are to those adventurers!

The model will come in dark grayish blue premium resin, but unpainted and not primed, as well as unassembled. If a bit is pictured in orange in the photo above, it’s included. In some of the photos we’ve taken ourselves a base may be attached solely to make the model stand up for it’s photoshoot. These minis are scaled for standard 28mm and will fit right in with most commercially available models you may already have in your party. Also in some of our own photos there is a painted model for scale. That painted model is not included and not for sale right now, but an unpainted copy can be gotten from the Human Female Paladin On Foot listing.

About those bases. These models are printed and shipped as created by the designer. Some models come from them with base toppers or rocky bits and such to fit the pose, like if it’s got it’s foot up on a stone in front of it. That will be included, and the best base for those will be a flat base. The toppers are smaller in diameter than the base, and sit on top. The bases are also 3D printed, and our default shape is round. If you would prefer an oval or a square, or larger than standard, please drop a note in the Personalization box. We’d also be happy to “mix and match” base types if you go for the All Three discounted option.

**Some assembly may be required**
Larger models may need to be assembled when you get them. We’ll print them up, test fit them, and pack them as they are safely in pieces.

Tank and I spent a lot of time finding the perfect resin to maintain both detail retention and durability for normal gaming situations, and then some. We’ve settled on a mixed resin that gives amazing detail and has just enough flexibility.

If you receive your order with any broken bits, missing bits, misshapen bits, damage or holes, we’ll replace it free if you let us know within a few days of receipt. Some light sanding may be visible especially on the bottoms, but we use 3000 grit sandpaper to minimize that. It is, however just the nature of the technology. Sometimes the supports leave a little bit there and we try to remove it as cleanly as possible. If you do find a nub of one on a model, they can removed just like you would remove mould lines or sprue connections from the commercial injection moulded stuff out there. Some models are posed with the sword tip down as If it is stuck in the ground. These will have a flat tip, it’s not broken. Please bear that in mind when ordering.

Your model will be printed when ordered in the turn the order was received, normally within a few business days, and shipped via USPS. We’ll let you know when the deed has been done and when it’s on it’s way. How long it takes after that is in the carrier’s hands.

We can be reached either through Etsy messages or email at tanksworkshop [!at] gmail.com. We’d love to hear about what these minis are getting up to, or if you have ideas for how we can better serve the gaming community.

The legal stuff:
This listing is for a physical object, a printed version of the model. No electronic files or printable elements will be sold or delivered, ever.

Tank’s Workshop is licensed to sell Epic Miniatures printed models. Check them out on MyMiniFactory or on Patreon at:
https://www.patreon.com/epic_miniatures/